-40%
Script rhinestone Font - Customize words- Rhinestone Iron on Bling, Bedazzle
$ 4.75
- Description
- Size Guide
Description
Fancy Script Iron on Alphabets-all 10ssClear
Pick any combination of letters, can be upper or lower
Upper heights varies from 2" to 3"
Lower heights varies from 1.1" to 2.5"
REFUNDS are NOT given for letters not used.
Enter the letters how you'd like them to appear: in NOTE TO SELLER
EXP:
All caps (BRIDE),
All lower case (flower girl),
A mixture of caps and lower (Maid Of Honor)
We will send as the complete word OR if too long to ship, we will split the words up but
super easy to line up all together to iron on to your garments.
*****I have NO control over how fast the postal service gets your order to you.
If you need them quickly, please upgrade to priority mail.*******
Can be easily applied to fabric with a home iron.
We use clear but if you Need another color Message me!!!
Colors cost a tad bit more.
RHINESTONE PRESSING INSTRUCTIONS:
1. Preheat iron to cotton setting.
2. Carefully remove transfer from cardboard packaging.
3. Peel off textured backing from the design (stones should stick to the clear plastic sheet). If any stones have shifted out of place, put them back in place using tweezers.
4. Place plastic sheet, stone side down on fabric and press into place with hand. The clear plastic sheet should stick to the fabric.
5. Place iron over design area and apply steady pressure for 15 seconds - DO NOT MOVE IRON AROUND AS STONES MAY SHIFT –
6. Turn Garment WRONG SIDE OUT and Place iron over design area for another 15 seconds and repeat.
7. Set aside and allow to cool for 3 to 5 minutes.
8. Turn fabric to right side out. Slowly and carefully peel the clear plastic sheet away from the fabric. If all stones are not sticking, you may re-iron on the opposite side of the fabric again.
Best Care: Wash inside out and air dry.
*****Wear To Start is NOT responsible for garments for any reason. Look over carefully prior to ironing. Make sure the back of the transfer is free of plastic or debris. Use tweezers to remove any unwanted materials that might have been missed from the transfer, or to put the rhinestone back in place if they moved from original location on the carrier.****